50
Alternatively, press the Playlist Button to toggle the Playlist setting
between Disc and Programmed order. See Figure 86.
Figure 86 – Playlist Button
9. Press the Play button to begin play.
Editing a Programmed Playlist
You may edit your playlist by following these steps:
1. If the disc is playing press the Stop button. Playlists may only be
programmed or edited in Stop mode.
2. If the Player Information screen is not visible, press the OSD button
to display it. Make sure to press the Program icon on the left side of
the screen so that you may view the play order column, and navigate
until the Prg list setting is highlighted. See Figure 87. Select it and
change it to the Disc List option so that you may view all tracks on
the disc.
Figure 87 – Viewing a Programmed Playlist
3. Scroll to the play order number for the track you wish to edit, and
select it. See Figure 88.
Figure 88 – Editing a Track Within a Playlist
a) To move the selected track to the end of the playlist, select the
Add option.
b) To move the selected track to a different position in the playlist, scroll
to the option that shows three dashed lines. Use the Numeric Keys to
enter the desired order in the playlist, and press the Enter button.
c) To delete the track from the playlist, select the Clear option.
d) If you wish to add a track that was not previously programmed
into your playlist, then scroll to its play order number, select it and
program it into the list using either option a) to add it to the end of
the list or option b) to program it to a specific place in the list. See
Figure 89.
Figure 89 – Adding a New Track to an Existing Playlist
Canceling A Programmed Playlist
If you wish to play the tracks in the original order in which they appear
on the disc, navigate to the Playlist setting and select the Disc’s order
option. Your playlist will be saved, and you may play the tracks in
programmed order by changing the Playlist setting.
To clear a programmed playlist from the HS 500’s memory, follow one
of these procedures:
1. Navigate to the heading of the play-order column (either Disc list or
Prg list) and select it. Choose the Clear Program option.
2. Open the disc drawer. When you close it, even if the same disc is
loaded, the playlist will have been cleared.
Using the HS 500 Tuner
Select the HS 500 tuner as the source either by pressing the RADIO
button on the remote, which will also turn on the system if it is in
Standby mode, or by pressing the OSD button to access the menu for
the current source. Use the
‹/› Navigation Buttons to highlight RADIO
and press Enter to select it. The Radio screen will appear as shown in
Figure 90.
Figure 90 – Radio (Tuner) Screen
The screen contains the following information:
AUDIO: This setting is used to select the audio surround mode.
STATION NAME: If you have selected the RDS (Radio Data Service)
display by selecting its icon on the left side of the screen, this line will
OPERATION
(2 pages)
(4 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals