Harman-kardon HS 500 User Manual download pdf (Page 8)

Standby/On Switch: This is an electrical switch that turns the

HS 500 on for playback, or leaves it in standby mode for quick turn-on

using this switch or the remote control.

Power Indicator: This LED surrounds the Standby/On Switch. When

the HS 500 is plugged into AC power, the LED turns amber to indicate

that the HS 500 is in Standby mode (ready to be turned on). When the

HS 500 is turned on (by pressing the Standby/On Switch or one of the

Source Selectors on the remote), the LED turns blue. If this LED ever

turns red, immediately unplug the HS 500. Check the speaker-wire

connections to make sure no wires are shorting out by touching each

other. If the LED remains red, bring the HS 500 to an authorized

Harman Kardon service provider.

Open/Close: Press this button to open or close the disc drawer.

When the HS 500 is in standby mode, press this button to turn on the

HS 500 and open the drawer. Before pressing this button, always make

sure no objects are blocking the drawer. Remember to close the door

or turn off the HS 500 when you have finished. The door will only close

automatically when the unit is turned off.

Volume Control: Turn this knob to raise or lower the volume,

which will be shown on screen as an increasing or decreasing row

of bars in the Message Display.

Message Display: Various messages appear in this display

in response to commands. In addition, a variety of indicators will

light at various times to display the current source, playback mode

(if appropriate), video settings or other aspects of the HS 500’s

status as described throughout this manual.

Disc Drawer: This drawer holds a disc that is played in the HS 500.

Press the Open/Close button on top of the HS 500 to access it. Be sure

to carefully seat all discs in the recess in the drawer tray. Remember to

close the drawer when you are finished, as it will not close automatically

without turning off the unit.

Headphone Jack: Insert a 1/8" headphone plug into this jack for

private listening. An optional adapter is necessary to use 1/4" or other

size headphone plugs.

USB 1 Port: Gently insert a flash drive, card reader, digital camera

or other USB device, or a USB standard-A cable connected to a USB

device, in this port. Be certain to orient the plug’s plastic tongue so that

it will insert adjacent to the receptacle’s tongue, and seat the plug fully.

You may insert or remove the device at any time; there is no installation

or ejection procedure. The HS 500 is capable of playing MP3 and

Windows Media

WMA audio files, and MPEG 2 and uncompressed

AVI files that are stored on the device. The HS 500 can also display

still-image files, but only in the JPEG format.

Do not

connect a PC or

other USB host/controller to this port, or you may damage both the

HS 500 and your device.

FRONT-PANEL CONTROLS

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 71 72

Comments to this Manuals

No comments

Harman-kardon HS 500 User Manual Page 8

Comments to this Manuals

Related products and manuals for Home Theater Systems Harman-kardon HS 500