Harman-kardon AVR 445 User Manual download pdf (Page 13)

MAIN REMOTE CONTROL FUNCTIONS 13

ENGLISH



Preset Up/Down: When the tuner is in

use, press these buttons to scroll through the

stations programmed into the AVR’s memory.

When CD or DVD is selected using the Input

Selector button

, these buttons may func-

tion as Slow Fwd/Rev (DVD) or ”+10” (CD, CDR).



Clear Button: Press this button to clear

incorrect entries when using the remote to directly

enter a radio station’s frequency.



Memory Button: Press this button to enter

a radio station into the AVR’s preset memory. Two

underline indicators will flash at the right side of

the Main Information Display

, you then

have five seconds to enter a preset memory

location using the Numeric Keys

. (See

page 49 for more information.)



Delay Select Button: This button selects

adjustments to the A/V Sync Delay and the

individual channel displays. The first press of the

button displays an

A/V SYNC DELAY

message in the Lower Display Line

and in

the on-screen display, which means that you may

change the amount of time that all channels are

delayed together behind the video. This enables

you to compensate for the loss of lip sync that

may be caused by digital video processing in your

display or by television stations. To change the

A/V Sync Delay, press the Set Button

while

the

A/V SYNC DELAY message is visible

and then use the

⁄

Navigation Button

to change the setting so that the sound and the

video image are in sync. To change the delay for

an individual output channel, press the

⁄

Navigation Button

until the desired

channel name is shown, and then press the Set

Button

. Use the

⁄

Navigation

Buttons

to change the delay amount. (See

page 33 for more information on delay options.)



Program Button: This button is used to

begin the process of programming the remote.

Press and hold this button for three seconds to

place the remote in the programming mode.

Once the red LED under the Set Button

lights, release the button. You may then select

from the desired option. (See pages 51-59 for

more information on configuring the remote.)



Speaker Select: Press this button to begin

the process of configuring the AVR’s Bass

Management System for use with the type of

speakers used in your system. Once the button

has been pressed, use the

⁄

buttons

select the channel you wish to set up. Press the

Set Button

and then select the speaker

type (Large, Small or None) appropriate with the

speaker in use. (See page 21 for more

information.)



Multi-Room: Press this button to activate

the Multiroom system or to begin the process of

changing the input or volume level for the

second zone. (See page 47 for more information

on the Multiroom system.)



Volume Up/Down: Press these buttons to

raise or lower the system volume.



EzSet/EQ Button: Press this button to turn

the filters used by EzSet/EQ on or off. This allows

you to hear the difference in system performance

when EzSet/EQ is engaged or out of the signal

path.



Channel Up/Down Selector: This button

has no function when the AVR is being

controlled, but when programmed for use with a

VCR, TV, cable box, satellite receiver or other

similar product it will change the channel up or

down. See pages 51-59 for more information on

programming the remote.



Mute: Press this button to momentarily

silence the AVR or TV set being controlled,

depending on which device has been selected.

When the AVR remote is being programmed to

operate another device, this button is pressed with

the Input Selector button

to begin the

programming process. (See page 51 for more

information on programming the remote.)



Tone Control Button: This button controls

the tone mode settings, enabling adjustment of

the bass and treble boost/cut. You may also use

it to take the tone controls out of the signal path

completely for “flat” response. The first press of

the button displays a

TONE IN message in the

Lower Display Line

and in the on-screen

display. To take the controls out of the signal

path press either of the

⁄

Navigation

Buttons

until the display reads TONE

OUT

. To change the bass or treble settings,

press the button again until the desired option

appears in the Lower Display Line

and in

the on-screen display and then press either of

the

⁄

Navigation Buttons

to enter the

desired boost or cut setting. See page 25 for

more information on the tone controls.

Main Remote Control Functions

30362_AVR445_ENG 20/11/06 14:56 Side 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 65 66

Comments to this Manuals

No comments

Harman-kardon AVR 445 User Manual Page 13

Comments to this Manuals

Related products and manuals for Acoustics Harman-kardon AVR 445