Harman Kardon HKTS 16 Owner's Manual download pdf (Page 9)

HKTS 9/16

LEFT

LINE-LEVEL

OUTPUTS

+– +–

+ –

+–

+ –

+–

–

RIGHT

SURROUNDFRONT CENTER

ENGLISH

Speaker Connections

Front Left Speaker Cable (White Bands) Center Speaker Cable (Green Bands)

Surround Right Speaker Cable (Gray Bands)

Receiver

Subwoofer

Surround Left Speaker

Cable (Blue Bands)

Front Right Speaker Cable (Red Bands)

Set Input Mode Switch

to “Normal”

Stereo Audio Cable (Not

supplied, Red and White Ends)

Connecting the Subwoofer to a Receiver or Preamp/Processor with

Line Outputs

Use this installation method for receivers and preamp/processors that do not have a

dedicated subwoofer output but do have preamp-level (volume-controlled) line outputs.

If the receiver or preamp/processor has a dedicated subwoofer output with low-pass

ﬁltering, see Connecting the Subwoofer to a Receiver or Preamp/Processor with a

Dedicated Subwoofer Output, on page 8.

If you’re connecting to a receiver with left and right line outputs, connect the LFE (purple)

connector of the supplied combination LFE and trigger cable to one of those outputs and

to either of the HKTS 210SUB’s Line-Level L/R In connectors

. Use a second RCA

cable (not supplied) to connect the other receiver or preamp line output to the other of

the HKTS 210SUB’s Line-Level L/R In connectors

. Set the subwoofer's Input Mode

switch

in the “Normal” position.

Connect each satellite speaker and the center speaker to the corresponding speaker

terminals on your receiver or ampliﬁer.

After you have made and veriﬁed all connections, plug the HKTS 210SUB’s AC Power

cord

into an active AC outlet.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

HKTS 9/16 1

Comments to this Manuals

No comments

Harman Kardon HKTS 16 Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for Loudspeakers Harman Kardon HKTS 16