SB35
SABRE SB35 Subwoofer Rear Panel Controls
6
Optical (digital optical audio in): If your TV, disc player or cable/satellite tuner has
an optical digital output, use the included optical cable to connect it here.
Power input DC: Connect the included power supply to this port.
IR Transmitter (Optional): Although the SB35 can be wall-mounted, most customers
place their soundbar on a TV stand. This can be problematic as it may block the TV’s
remote control sensor, forcing you to stand up and angle your remote to control your TV.
In this case, we recommend you to use the supplied IR Repeater.
To install the IR Repeater:
1. Plug the supplied IR Repeater cable to the back of the SB35.
2. Place the IR Repeater on the back of the SB35 in front of the TV IR Receiver.
The television IR command will automatically transmit from the IR receiver of the SB35
to the IR receiver of the television.
DC IN 24V 2.7A
USB Port: The USB port is only for software upgrade. The SB35 allows users to upgrade
the software using the HK Remote app from mobile devices. To upgrade the software
in the SB35 system, you will require a mobile device with Android or iOS operating
system. The software upgrade in SB35 can be performed using the Bluetooth channel
to communicate with the mobile device.
HDMI 1, HDMI 2 and HDMI 3: HDMI connections transmit digital audio and video
signals between the devices. If you have source devices with HDMI connectors, you
should use it for the best possible audio and video performance quality.
HDMI TV: Connect your television to this input using the supplied HDMI cable. If your TV
supports Audio Return Channel (ARC), you can use the supplied HDMI cable to connect
to your television by enabling the TV ARC output. Check the TV settings, if the ARC does
not work. The ARC will send back the audio signal from the television automatically
to the SABRE SB35. If your television does not support ARC, you will have to run an
additional optical or analog cable base on your television compatibility.
SABRE SB35 Subwoofer Rear Panel Controls
The rear panel of the SABRE SB35 subwoofer provides the following:
• Crossover adjustment
• Wireless pairing button
• Wireless pairing indicator
• Phase adjustment
Crossover adjustment: This control adjusts the SABRE SB35 subwoofer’s crossover.
The higher you set the Crossover control, the higher in frequency the subwoofer will
operate and the more its bass will overlap that of the soundbar. This adjustment helps
you achieve a smooth transition of bass frequencies between the subwoofer and the
soundbar for a variety of different rooms and subwoofer locations.
Wireless pairing button: Press the wireless subwoofer pairing button to initiate
wireless pairing between soundbar and the wireless subwoofer.
Wireless pairing indicator: This indicator in the subwoofer displays the following:
• Wireless pairing: Blue light blinks with a cycle of 300 ms
• Wireless connection: Blue light constant
• Wireless disconnection: Blue light blinks with a cycle of 1s
Phase Adjustment (0-180°): The phase adjustment switch determines whether the
subwoofer driver’s piston-like action moves in and out in phase with the speakers in
the soundbar. If the subwoofer needs to play out of phase with the soundbar speakers,
the sound waves from the soundbar can cancel out some of the sound waves from the
subwoofers, reducing bass performance and sonic impact. This phenomenon depends,
up to some extent, on the placement of the subwoofer and soundbar relative to each
other in the room.
(32 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals